QNA 게시판입니다.
궁금한점 있으시면 문의하세요. 답변은 댓글로 되어집니다.
내용에 그림을 삽입을 원할 경우, 파일첨부를 한 뒤 "본문 삽입"을 하시면 그림을 삽입 할 수 있습니다.
PMAC2A PC/104의 AD option에 관련된 내용입니다.
The optional analog-to-digital converter inputs are ordered either through Option-12 on the base board or Option-2 on the axes expansion board. Each option provides two 12-bit analog inputs with a ±10 VDC range. The M-variables associated with these inputs provided a range of values between +2048 and –2048 for the respective ±10 VDC input range. The following is the software procedure to setup and read these ports.
** SERI1 보드에 신호를 연결하시고 아래 설정을 터미널을 통해서 하시구요. M105를 읽으시면 됩니다.
;Base Board Analog Inputs
I903 = 1746 ; Set ADC clock frequency at 4.9152 MHz
WX:$C014, $1FFFFF ; Clock strobe set for bipolar inputs
M105->X:$0710,12,12,S ; ADCIN_1 on JMACH1 connector pin 45
M205->X:$0711,12,12,S ; ADCIN_2 on JMACH1 connector pin 46
>
>그리고 케이블의 load cell에서 입력신호를 받으려면 어떻게 해야 하나요
>
The optional analog-to-digital converter inputs are ordered either through Option-12 on the base board or Option-2 on the axes expansion board. Each option provides two 12-bit analog inputs with a ±10 VDC range. The M-variables associated with these inputs provided a range of values between +2048 and –2048 for the respective ±10 VDC input range. The following is the software procedure to setup and read these ports.
** SERI1 보드에 신호를 연결하시고 아래 설정을 터미널을 통해서 하시구요. M105를 읽으시면 됩니다.
;Base Board Analog Inputs
I903 = 1746 ; Set ADC clock frequency at 4.9152 MHz
WX:$C014, $1FFFFF ; Clock strobe set for bipolar inputs
M105->X:$0710,12,12,S ; ADCIN_1 on JMACH1 connector pin 45
M205->X:$0711,12,12,S ; ADCIN_2 on JMACH1 connector pin 46
>
>그리고 케이블의 load cell에서 입력신호를 받으려면 어떻게 해야 하나요
>