UMAC - High Performance Controller



   • 3U Rack Type Turbo Firmware
   • 최대 32축 구성, MACRO Interface지원
   • 다양한 축제어 카드를 혼용사용가능
     - Direct PWM, +/-10V, 스텝퍼
   • 다양한 피드백 및 IO장치 구성가능
   • USB2.0/Ethernet 100Base-T를 통한 고속통신 가능
   • 초고속 CPU Option 사용가능
매뉴얼바로보기 : http://www.deltatau.com/manuals/pdfs/ACC...9026131033 

 

 

24E2A

24E2A

 

UMAC에 장착되는 ANALOG  CARD 입니다.

 

2AXIS와 4AXIS가 있으며 필요에 따라 사용하실 수 있습니다.

 

위 사진은 2AXIS 입니다.

 

 

Board Configuration
An Acc-24E2A comes standard with one Servo IC providing four servo interface channels, which are
brought out on terminal blocks (standard) or DB15 connector. Each channel of servo interface circuitry
includes the following:

• Two output command signal sets, configurable as either:
• One pulse-and-direction
• Two DAC outputs
• 3-channel differential/single-ended encoder input
• Eight input flags, two output flags

Option 1A: If Option 1A is ordered, the circuitry and input/output connectors are provided for the third
and fourth channels associated with the Servo IC on the main Acc-24E2A. The command signals for this
option are ±10V.


Option 1D: If Option 1D is ordered, the circuitry and input/output connectors are provided for the third
and fourth channels associated with the Servo IC on the main Acc-24E2A. The command signals for this
option are digital PWM signals for direct PWM commutation. The option 1D description can be found in
the Acc-24E2 manual.